FREE DELIVERY ON ALL ORDERS IN AUSTRALIA

1 5

Selling fast!
Grab yours while you can

MP 250 D4.3 PRO

$519.00

Shipping and Returns

Refund & Returns Policy


GL Pro Sound prides itself on supplying high quality goods and the highest levels of customer service. We are happy to serve you at the highest level, especially in the case of an issue with the goods you have purchased. Please email us at info@glprosound.com.au within the warranty period so that we can address any problems, faults or issues.

In accordance with ACCC guidelines, we will endeavour to fix any problem, fault or issue with a good or service provided by us, within a reasonable timeframe, provided you retain your proof of purchase, have not abused or tampered with the product or service in question, or have not simply changed your mind or found it cheaper elsewhere. Also, you are not covered in the case that the issue, problem or defect was explained to you upon sale or delivery of the goods/services.

In the event that the product is not repairable, we will replace the product.

In the event that the product cannot be replaced, or an acceptable replacement cannot be agreed upon, you are entitled to a refund, or an applicable store credit if you would prefer.

All postage and insurance costs are to be paid by the buyer. We recommend that you return the product via Registered post and that you prepay all postage.

You assume any risk of lost, theft or damaged goods during transit; therefore we advise you take out shipment registration of insurance with your postal carrier. GL Pro Sound will not be responsible for parcels lost or damaged in transit if you choose not to insure.

The ACCC regulations and guidelines on the above, as well as a link to the Australian Consumer Law Consumer Guarantees can be found here:


https://www.accc.gov.au/consumers/consumer-rights-guarantees


If you have any enquiries regarding this document and/or the payment services offered by us through Shopify Payments, please email us at info@glprosound.com.au.

 

Shipping Policy

Gl Pro Sound will ship in stock goods within 48hrs some goods may be subject to be shipped within 14 days of receiving the order. All orders are shipped via Sendle. If goods cannot be processed a full refund will be offered. Shipping rates are $15 Aud flat rate 20kg and under. Over 20kgs will be calculated at checkout. If you have any queries please email info@glprosound.com.au.

Contact Us

Call us: (03)93791222

Email: Fill out our contact us form

Address: 14B Mareno Road, Tullamarine, 3043

10" SUBWOOFER

Outstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R&D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.  The MP 250 D4.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the Legend ML2000.3 and ML2500.3, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure. The compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound.  The 65-mm 4-layer voice coilis higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:

- Better thermal inertia to ensure low operating temperatures during musical transients;
- Maximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;
- Possibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.

The holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs. The terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).

  • Free shipping

  • 35 years in business

  • Australia wide install network
Hertz

MP 250 D4.3 PRO

$519.00

10" SUBWOOFER

Outstanding performance in a compact size, this is the target of Mille Pro car audio subwoofers. On the strength of its know-how acquired with Mille Legend, the R&D team has optimized the production process to offer the “Hertz Sound Experience” to a wider audience using part of the technologies and materials of the flagship line.  The MP 250 D4.3 cone is made by pressing paper pulp with the injection of mineral powders, the same construction technique used for Legend. The V-cone® profile increases rigidity, allowing the cone to function like a piston. Surround materials consist of high-purity IIR-butyl rubber. Like the Legend ML2000.3 and ML2500.3, the Mille PRO subwoofers are built with Boundary Free Surround technology allowing for a greater emission surface with equal diameter, generating higher sound pressure. The compact 6-spoke aluminum alloy anti-resonant basket is the same as the top model ML 2500.3 and contributes to the subwoofer’s mechanical damping, being absolutely transparent to the sound.  The 65-mm 4-layer voice coilis higher than 60 mm and wound in a TIL-P former, thus delivering high linear displacement. The 4 Ω + 4 Ω DVC impedance configuration improves versatility to match any amplifier system. The air cooling and decompression system avoids the need for a centre hole on the bottom plate with three advantages:

- Better thermal inertia to ensure low operating temperatures during musical transients;
- Maximization of the magnetic field induced to the coil with the same overall motor dimensions. Thanks to a greater amount of iron in the pole the likelihood of magnetic saturation decreases exploiting the maximum flux density generated from the magnet;
- Possibility to install the subwoofer right on the box wall, taking full advantage of its minimal dimensions. A damping rubber disk, provided with the product, secures the subwoofer to the box and ensures air exchange for the 10 vents on the bottom.

The holes behind the voice coil winding and the 10 vents on the bottom plate ensure greater air exchange to the coil inner layers and work in synergy with an innovative assembly system. It forces the air to pass through the air gap to keep the coil operating temperature low, even with the most extreme musical programs. The terminal uses solid push connectors with an antishort circuit cover accepting cables up to 8 AWG to provide ultra-low wiring resistance in low impedance configurations (1ohm).

View product
Back to top

  • Address 

    14B Mareno Rd, Tullamarine, VIC, Australia, 3043. 

  • Call us 

    (03)93791222