FREE DELIVERY ON ALL ORDERS IN AUSTRALIA

PA D5000.5 5 Channel Amplifier

$829.00

Shipping and Returns

Refund & Returns Policy


GL Pro Sound prides itself on supplying high quality goods and the highest levels of customer service. We are happy to serve you at the highest level, especially in the case of an issue with the goods you have purchased. Please email us at info@glprosound.com.au within the warranty period so that we can address any problems, faults or issues.

In accordance with ACCC guidelines, we will endeavour to fix any problem, fault or issue with a good or service provided by us, within a reasonable timeframe, provided you retain your proof of purchase, have not abused or tampered with the product or service in question, or have not simply changed your mind or found it cheaper elsewhere. Also, you are not covered in the case that the issue, problem or defect was explained to you upon sale or delivery of the goods/services.

In the event that the product is not repairable, we will replace the product.

In the event that the product cannot be replaced, or an acceptable replacement cannot be agreed upon, you are entitled to a refund, or an applicable store credit if you would prefer.

All postage and insurance costs are to be paid by the buyer. We recommend that you return the product via Registered post and that you prepay all postage.

You assume any risk of lost, theft or damaged goods during transit; therefore we advise you take out shipment registration of insurance with your postal carrier. GL Pro Sound will not be responsible for parcels lost or damaged in transit if you choose not to insure.

The ACCC regulations and guidelines on the above, as well as a link to the Australian Consumer Law Consumer Guarantees can be found here:


https://www.accc.gov.au/consumers/consumer-rights-guarantees


If you have any enquiries regarding this document and/or the payment services offered by us through Shopify Payments, please email us at info@glprosound.com.au.

 

Shipping Policy

Gl Pro Sound will ship in stock goods within 48hrs some goods may be subject to be shipped within 14 days of receiving the order. All orders are shipped via Sendle. If goods cannot be processed a full refund will be offered. Shipping rates are $15 Aud flat rate 20kg and under. Over 20kgs will be calculated at checkout. If you have any queries please email info@glprosound.com.au.

Contact Us

Call us: (03)93791222

Email: Fill out our contact us form

Address: 14B Mareno Road, Tullamarine, 3043

5 Channel D Class Amplifier - (70W x 4, 500W x 1) High

Pass Filter 12dB.oct Filter Frequency 40Hz-400Hz(front) 40Hz- 4kHz(rear) / Low Pass Filter Filter Frequency 80Hz-4kHz(front) /

Max Sensitivity 200mV-6V dB / RMS Power at 14.4V: Watts per channel NOT bridged @ 1 kHz 4 ohms 70 x 4 watts 2 ohms 100 x4 watts / Watts per channel bridged
4 ohms 200 x 2 watts

The PA D5000.5 is capable of bridging two full-range channels into a single full-range channel with higher output power. For instance, the front channels (FL and FR) when wired correctly will increase the output power from 70W per channel to 200W per channel (for a 4 ohm load). The same can be done for the rear channels (RL and RR). The most common configurations are four full-range channels and a subwoofer channel, or two bridged full-range channels and a subwoofer channel.

 Super-efficient class D design�Runs much cooler than conventional amps.

High-speed MOSFET switching�Power supply with outputs stable into 2 ohm loads for full range channel speakers and 1 ohm loads for subwoofer channel.

Protection�Thermal, DC offset, reverse DC voltage and short circuit protection.

Sub 1/Sub 2 Inputs�Line level inputs for subwoofer signal from head unit

SUB/INT source switch�In the INT position, the amplifier will filter the bass frequencies from the full range signal and send them to the subwoofer amplifier channel.

SUB sonic filter�Attenuates the frequencies below the settings on the control.

Remote bass level control�Set gain to match output from head unit.

 Rear Full, HPF switch�Selects between no filtering or a high pass filter to dial in your speakers� blending.

Channel mode switch (4CH/ST)�In the ST position, the amplifier sends the same signal to the front and rear channels.

Nickel-plated wire terminals & RCA connectors�Ensure maximum signal transfer.

Stainless steel hardware�Used throughout won�t corrode in humid environments.

  • Free shipping

  • 35 years in business

  • Australia wide install network

polk

PA D5000.5 5 Channel Amplifier

$829.00

5 Channel D Class Amplifier - (70W x 4, 500W x 1) High

Pass Filter 12dB.oct Filter Frequency 40Hz-400Hz(front) 40Hz- 4kHz(rear) / Low Pass Filter Filter Frequency 80Hz-4kHz(front) /

Max Sensitivity 200mV-6V dB / RMS Power at 14.4V: Watts per channel NOT bridged @ 1 kHz 4 ohms 70 x 4 watts 2 ohms 100 x4 watts / Watts per channel bridged
4 ohms 200 x 2 watts

The PA D5000.5 is capable of bridging two full-range channels into a single full-range channel with higher output power. For instance, the front channels (FL and FR) when wired correctly will increase the output power from 70W per channel to 200W per channel (for a 4 ohm load). The same can be done for the rear channels (RL and RR). The most common configurations are four full-range channels and a subwoofer channel, or two bridged full-range channels and a subwoofer channel.

 Super-efficient class D design�Runs much cooler than conventional amps.

High-speed MOSFET switching�Power supply with outputs stable into 2 ohm loads for full range channel speakers and 1 ohm loads for subwoofer channel.

Protection�Thermal, DC offset, reverse DC voltage and short circuit protection.

Sub 1/Sub 2 Inputs�Line level inputs for subwoofer signal from head unit

SUB/INT source switch�In the INT position, the amplifier will filter the bass frequencies from the full range signal and send them to the subwoofer amplifier channel.

SUB sonic filter�Attenuates the frequencies below the settings on the control.

Remote bass level control�Set gain to match output from head unit.

 Rear Full, HPF switch�Selects between no filtering or a high pass filter to dial in your speakers� blending.

Channel mode switch (4CH/ST)�In the ST position, the amplifier sends the same signal to the front and rear channels.

Nickel-plated wire terminals & RCA connectors�Ensure maximum signal transfer.

Stainless steel hardware�Used throughout won�t corrode in humid environments.

View product