FREE DELIVERY ON ALL ORDERS IN AUSTRALIA

PXE-0850X

$899.00

Shipping and Returns

Refund & Returns Policy


GL Pro Sound prides itself on supplying high quality goods and the highest levels of customer service. We are happy to serve you at the highest level, especially in the case of an issue with the goods you have purchased. Please email us at info@glprosound.com.au within the warranty period so that we can address any problems, faults or issues.

In accordance with ACCC guidelines, we will endeavour to fix any problem, fault or issue with a good or service provided by us, within a reasonable timeframe, provided you retain your proof of purchase, have not abused or tampered with the product or service in question, or have not simply changed your mind or found it cheaper elsewhere. Also, you are not covered in the case that the issue, problem or defect was explained to you upon sale or delivery of the goods/services.

In the event that the product is not repairable, we will replace the product.

In the event that the product cannot be replaced, or an acceptable replacement cannot be agreed upon, you are entitled to a refund, or an applicable store credit if you would prefer.

All postage and insurance costs are to be paid by the buyer. We recommend that you return the product via Registered post and that you prepay all postage.

You assume any risk of lost, theft or damaged goods during transit; therefore we advise you take out shipment registration of insurance with your postal carrier. GL Pro Sound will not be responsible for parcels lost or damaged in transit if you choose not to insure.

The ACCC regulations and guidelines on the above, as well as a link to the Australian Consumer Law Consumer Guarantees can be found here:


https://www.accc.gov.au/consumers/consumer-rights-guarantees


If you have any enquiries regarding this document and/or the payment services offered by us through Shopify Payments, please email us at info@glprosound.com.au.

 

Shipping Policy

Gl Pro Sound will ship in stock goods within 48hrs some goods may be subject to be shipped within 14 days of receiving the order. All orders are shipped via Sendle. If goods cannot be processed a full refund will be offered. Shipping rates are $15 Aud flat rate 20kg and under. Over 20kgs will be calculated at checkout. If you have any queries please email info@glprosound.com.au.

Contact Us

Call us: (03)93791222

Email: Fill out our contact us form

Address: 14B Mareno Road, Tullamarine, 3043

PXE-0850X

12-Channel Audiophile Processor with Built-In 8-Channel Amplifier

The PXE-0850X offers music enthusiasts the ultimate audio experience. The PXE-0850X is a DSP sound processor and consists of advanced digital sound processing technology through innovative software including tuning wirelessly via a smartphone app or PC software via USB connection. Extreme sound can be achieved with key features such as 31-bands of EQ adjustment, parametric filters, signal time-alignment, input delay and time correction. The 6 channel utilises the in-built digital amplifier while the 12 channel RCA outputs provide the use of an external amplifiers, a combination of both functions can be used to support any sound configuration.

A series of ultra-high performance audio components have been built-in to achieve Alpine’s heritage quality sound. Perfect for upgrading your system, you can easily add new sources, such as bluetooth for audio playback straight from your phone, or high-resolution media via the digital coax and optical inputs. Furthermore, with its Navi-Mix function, you can listen to important navigation voice guidance from your factory navigation system all-while listening to your sound source connected to the PXE-0850X. 

With powerful tuning on-board you can accomplish truly high-end sound of virtually any system configuration. 

Features

  • 31-band Graphic EQ per channel (front L/R, rear L/R, centre, subwoofer: 10-band), Gain -12dB to +12dB
  • Parametric EQ (front L/R 10-band, rear L/R 10-band, subwoofer 5-band, center 10-band), Q 0.5/1/1.5/2/2.5/3/4/5, Gain -12dB to +12dB
  • 8 x 25W RMS outputs (mirrors the first 8 RCA outputs)
  • 6 Low and/or High-level inputs
  • 12 RCA outputs
  • Digital Time Correction
  • TI 32-bit DSP with 300MHz floating point processing
  • TI 24-bit premium audio ADC/DAC
  • S/PDIF Digital Coax Input
  • Optical Digital Input
  • Sound Tuning via Smartphone App
  • Sound Tuning via PC Software
  • USB Port for Computer Setup
  • Remote Controller Included
  • Bluetooth Module Included
  • Bluetooth Audio Streaming
  • System integration sound processor for use when adding amplifiers to a factory or aftermarket head unit
  • Matrix mixing allows for summing and input/output signal management
  • High pass, low pass, and bandpass, independent filters per channel
  • Specialised type filtering: Butterworth, Linkwitz-Riley, Bessel
  • Save and share tuning presets
  • Source Selection: Bluetooth® Audio, High-level input (head unit signal), S/PDIF input, Analog Aux inputs (aftermarket head unit signal)
  • Dash-mounted remote controller included for Volume, Preset store/recall, Source Selection
  • Option to be used in stand-alone mode without the remote controller plugged in
  • Navi Mix Function to enable factory navigation instructions, while listening PXE-0850X sound source

Specifications

Graphic EQ number of bands:
  • Front (left and right): 31 bands
  • Rear (left and right): 31 bands
  • Center: 31 bands
  • Subwoofer: 10 bands
  • Graphic EQ boost cut range: +-12 dB (in 0.5 dB steps)
Parametric EQ number of bands:
  • Front/Rear/Center: 10 bands
  • Subwoofer: 5 bands
Parametric EQ frequency:

Front/Rear/Center: 20/22/25/28/31.5/36/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20k(Hz)

Filters / Time Correction:
  • Frequency range: 20Hz ~ 20KHz, 1Hz steps
  • Q: 0.404 ~ 28.85, 0.01 steps
  • Gain: -12.0dB ~ +12.0 dB, 0.1 dB steps
  • Filter crossover points: 20Hz – 20KHz. 1Hz steps
  • Slopes: 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB
  • Up to 20ms of time delay per channel
  • Delay units: 0.000 to 20 milliseconds, 0.00 to 692 centimetres, 0.00 to 273 inches 0 deg. or 180 deg. phase adjustment per channel
Technical:
  • Power Supply: DC 9V – 15V
  • Dynamic Range: ≥110dB
  • Signal to Noise Ratio: ≥100dB
  • Frequency Response: 20Hz – 20kHz
  • Power Rating: 25W RMS x 8  (4Ω,<1% THD+N, 14.4V)
Dimensions:

Weight: 1.35 kg
Width: 169 mm (6-3/4″)
Height: 50.8 mm (2″)
Depth: 215 mm (8-1/2″)

 

  • Free shipping

  • 35 years in business

  • Australia wide install network

Alpine

PXE-0850X

$899.00

PXE-0850X

12-Channel Audiophile Processor with Built-In 8-Channel Amplifier

The PXE-0850X offers music enthusiasts the ultimate audio experience. The PXE-0850X is a DSP sound processor and consists of advanced digital sound processing technology through innovative software including tuning wirelessly via a smartphone app or PC software via USB connection. Extreme sound can be achieved with key features such as 31-bands of EQ adjustment, parametric filters, signal time-alignment, input delay and time correction. The 6 channel utilises the in-built digital amplifier while the 12 channel RCA outputs provide the use of an external amplifiers, a combination of both functions can be used to support any sound configuration.

A series of ultra-high performance audio components have been built-in to achieve Alpine’s heritage quality sound. Perfect for upgrading your system, you can easily add new sources, such as bluetooth for audio playback straight from your phone, or high-resolution media via the digital coax and optical inputs. Furthermore, with its Navi-Mix function, you can listen to important navigation voice guidance from your factory navigation system all-while listening to your sound source connected to the PXE-0850X. 

With powerful tuning on-board you can accomplish truly high-end sound of virtually any system configuration. 

Features

  • 31-band Graphic EQ per channel (front L/R, rear L/R, centre, subwoofer: 10-band), Gain -12dB to +12dB
  • Parametric EQ (front L/R 10-band, rear L/R 10-band, subwoofer 5-band, center 10-band), Q 0.5/1/1.5/2/2.5/3/4/5, Gain -12dB to +12dB
  • 8 x 25W RMS outputs (mirrors the first 8 RCA outputs)
  • 6 Low and/or High-level inputs
  • 12 RCA outputs
  • Digital Time Correction
  • TI 32-bit DSP with 300MHz floating point processing
  • TI 24-bit premium audio ADC/DAC
  • S/PDIF Digital Coax Input
  • Optical Digital Input
  • Sound Tuning via Smartphone App
  • Sound Tuning via PC Software
  • USB Port for Computer Setup
  • Remote Controller Included
  • Bluetooth Module Included
  • Bluetooth Audio Streaming
  • System integration sound processor for use when adding amplifiers to a factory or aftermarket head unit
  • Matrix mixing allows for summing and input/output signal management
  • High pass, low pass, and bandpass, independent filters per channel
  • Specialised type filtering: Butterworth, Linkwitz-Riley, Bessel
  • Save and share tuning presets
  • Source Selection: Bluetooth® Audio, High-level input (head unit signal), S/PDIF input, Analog Aux inputs (aftermarket head unit signal)
  • Dash-mounted remote controller included for Volume, Preset store/recall, Source Selection
  • Option to be used in stand-alone mode without the remote controller plugged in
  • Navi Mix Function to enable factory navigation instructions, while listening PXE-0850X sound source

Specifications

Graphic EQ number of bands:
  • Front (left and right): 31 bands
  • Rear (left and right): 31 bands
  • Center: 31 bands
  • Subwoofer: 10 bands
  • Graphic EQ boost cut range: +-12 dB (in 0.5 dB steps)
Parametric EQ number of bands:
  • Front/Rear/Center: 10 bands
  • Subwoofer: 5 bands
Parametric EQ frequency:

Front/Rear/Center: 20/22/25/28/31.5/36/40/45/50/56/63/71/80/90/100/110/125/140/160/180/200/220/250/280/315/360/400/450/500/560/630/710/800/900/1k/1.1k/1.2k/1.4k/1.6k/1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/11k/12.5k/14k/16k/18k/20k(Hz)

Filters / Time Correction:
  • Frequency range: 20Hz ~ 20KHz, 1Hz steps
  • Q: 0.404 ~ 28.85, 0.01 steps
  • Gain: -12.0dB ~ +12.0 dB, 0.1 dB steps
  • Filter crossover points: 20Hz – 20KHz. 1Hz steps
  • Slopes: 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB
  • Up to 20ms of time delay per channel
  • Delay units: 0.000 to 20 milliseconds, 0.00 to 692 centimetres, 0.00 to 273 inches 0 deg. or 180 deg. phase adjustment per channel
Technical:
  • Power Supply: DC 9V – 15V
  • Dynamic Range: ≥110dB
  • Signal to Noise Ratio: ≥100dB
  • Frequency Response: 20Hz – 20kHz
  • Power Rating: 25W RMS x 8  (4Ω,<1% THD+N, 14.4V)
Dimensions:

Weight: 1.35 kg
Width: 169 mm (6-3/4″)
Height: 50.8 mm (2″)
Depth: 215 mm (8-1/2″)

 

View product